Post by Smashing Dale on May 15, 2014 10:57:36 GMT
How to Clean Air Ducts Yourself: If you want to at least partially clean your home’s air ducts, there are some steps to take, according to Tom’s Mechanical:
1. What you’ll need: Mix one part household cleaner, such as bleach, with three parts water for a cleaning solution and mix in a bucket. You’ll also need plastic zip ties for reconnecting ducts; cloths or rags; and mastic and a small paintbrush to seal the duct connections.
2. Tools: Brush to apply mastic, screwdriver.
3. How much time it takes: Allow 20 minutes per duct.
4. Process: Remove the outer and inner liners from the duct connectors at the unit and at the ceiling or wall. After mixing the cleaning solution in a bucket, soak the rags in the solution, then wring them out so they’re damp with the solution.
Wipe the inner liner with the rags, reaching in as far as you can. This method will only allow for the ends of the duct to be clean.
Once you’ve cleaned as much of the duct as possible, apply a light layer of mastic over the duct connector and slide the inner liner back over the metal duct connector. Use a plastic zip tie, or aPanduit strap, to secure the inner liner onto the duct connector.
Next, pull the insulation and outer liner over the duct connector. Use another Panduit strap to secure the outer liner and insulation in place. Apply another layer of mastic over the outer liner of the duct. Continue cleaning individual ducts as needed. You can also vacuum inside the duct as far as you can reach.
5. What to expect: Expect to only clean the surfaces and ends of each duct. It’s a good method to remove visible dirt, debris and dust that has accumulated around the end of the duct.
Cleaning the air duct regularly will help in reducing the risk of having respiratory related sickness...
For more information on how check your ductings cleanliness, Please Visit: www.smashingclean.com
1. What you’ll need: Mix one part household cleaner, such as bleach, with three parts water for a cleaning solution and mix in a bucket. You’ll also need plastic zip ties for reconnecting ducts; cloths or rags; and mastic and a small paintbrush to seal the duct connections.
2. Tools: Brush to apply mastic, screwdriver.
3. How much time it takes: Allow 20 minutes per duct.
4. Process: Remove the outer and inner liners from the duct connectors at the unit and at the ceiling or wall. After mixing the cleaning solution in a bucket, soak the rags in the solution, then wring them out so they’re damp with the solution.
Wipe the inner liner with the rags, reaching in as far as you can. This method will only allow for the ends of the duct to be clean.
Once you’ve cleaned as much of the duct as possible, apply a light layer of mastic over the duct connector and slide the inner liner back over the metal duct connector. Use a plastic zip tie, or aPanduit strap, to secure the inner liner onto the duct connector.
Next, pull the insulation and outer liner over the duct connector. Use another Panduit strap to secure the outer liner and insulation in place. Apply another layer of mastic over the outer liner of the duct. Continue cleaning individual ducts as needed. You can also vacuum inside the duct as far as you can reach.
5. What to expect: Expect to only clean the surfaces and ends of each duct. It’s a good method to remove visible dirt, debris and dust that has accumulated around the end of the duct.
Cleaning the air duct regularly will help in reducing the risk of having respiratory related sickness...
For more information on how check your ductings cleanliness, Please Visit: www.smashingclean.com
